Industrial protocols, IIoT messaging, and IT integration in one runtime.
Connect your devices with six native protocol adapters. Map device addresses to tags, set polling rates, and use project HTTP and WebSocket APIs to connect your applications.
Native adapters and application interfaces.
Connect PLCs, meters, controllers, and brokers to project tags. HTTP, WebSocket, and PostgreSQL connect your applications.
See device connection status and tag quality.
The device endpoint reports configured driver names, enabled state, connection status, and tag counts. Inspect tag quality through project APIs and review recent gateway logs when investigating connection problems. With authentication on, device status and logs use a gateway administrator session.
- Per-device driver, enabled state, and connection status.
- Configured tag count for each device.
- Recent gateway messages through GET /api/logs.
- Tag-level value, quality, and timestamp through project APIs.
# GET /api/devices — example configured devices # Gateway administrator session [ { "name": "press-plc-01", "driver": "s7", "enabled": true, "status": "connected", "tag_count": 2 }, { "name": "flow-bench-02", "driver": "opcua", "enabled": true, "status": "connected", "tag_count": 2 } ]
Develop and test against simulated industrial devices.
Develop and check integrations with simulators for all six native adapter families: Modbus TCP, EtherNet/IP, S7, OPC UA, MQTT, and BACnet/IP.
Recipe-driven forming cycles with pressure, dwell, ram state, and operator commands.
Reference and test-meter readings, target flow, run commands, and bench state.
Broker-connected sensors publishing scalar JSON values for tag mapping.
The full simulator fleet lives in the device zoo; the hands-on walkthrough is the quickstart.
Talk through your device connections.
Bring your equipment list, protocol requirements, and address maps to a technical discussion.